Spec:
Item Type: Digital Camera Dummy Battery
Material: ABS, metal
Weight: Approx. 32g/1.1oz
Cable Length: Approx. 50cm/19.7in
TYPE C Input: QC PD 9 to 20V
TYPE C Output: 8.4V (Maximum 24W)
Support fixed voltage or single chip control mode
Support PD Protocol: 5V, 9V, 12V, 15V, 20V
Support QC Protocol: 5V, 9V, 12V, 20V
Support FCP Protocol: 5V, 9V, 12V
Support for AFC Protocol: 5V, 9V
CLASS A and CLASS B voltage levels are supported
Applicable Model: Suitable for A7, A7R, A7S, A7II, A7RII, A7SII, A6500, A6400, A6300, A6100, A6000, A5100, A5000, A3000, NEX5, NEX7, DSC RX10 II, III, IV, ZV E10 and other digital cameras

How to Use:
1. Use USB to TYPE C cable or TYPE C to TYPE C cable to access the power supply with fast charging agreement
2. Insert the dummy battery into the TYPE C end, the green POWER indicator light is on for normal operation, and if it is not on, there is no power input
3. The dummy battery into the battery compartment, cover the battery cover
4. Open the camera power switch for normal use
Note: (When the input is 9V when the output may only be 7.8V for the normal voltage drop, can be used normally, the camera may not show full power)

PackageList:
1 x Digital Camera Dummy Battery
1 x TYPE C to TYPE C Cable