Size: 80mm (diameter of the middle body: 80mm)
Speed regulation mode: change the spindle speed through the three-phase output inverter and adjust the frequency of the inverter.
Cooling method: water cooling
Power interface: YX20-4 pin waterproof aviation plug is optional. Aviation plugs marked "1", "2", "3", "4", "1", "2", "3" are connected to the inverter (U, V, W), and 4 is connected to the inverter land .
Power: 1.5kw
Voltage: 220v
Current: 6.0A
Frequency: 400Hz
Speed: 24000rpm
Number of strokes: 2
Jump close: less than 0.01mm
Diameter (mm): 80
4pcs ceramic ball bearings (fully sealed angular contact bearings)
Chuck: ER16
Clamping tool diameter: 10mm, 9mm, 8mm, 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3.0mm, 2.5mm, 2mm, 1.5mm, 1mm (standard 4mm)
Water-cooled ER16 chuck holder
Grease lubrication
Main application: engraving iron, steel, stainless steel, aluminum, hardwood, etc. (this is a high-precision, high-torque professional metal spindle)
The working environment temperature of the spindle is usually -10~40.
Before installing the first electric spindle to rotate the spindle head by hand, you should feel flexibility and no blockage.
P4 fully sealed angular ceramic bearings can extend the life of the spindle.
The longer the length, the greater the torque and the greater the power.
Careful assembly makes the spindle more precise.
Accuracy is 0.01mm, coaxial cable is less than 0.0025mm
1. Our main shaft uses 4 bearings.
2. The bearing is resistant to high temperature and low temperature
3. The ball bearing has low friction, low noise and long service life.
There are 4 labyrinth seals in the front section of the main shaft, which can prevent the leakage of bearing lubricating oil and bearing seals under high-speed conditions.
When the spindle is stored and transported, the bearing condition