Package Include:
Front Right Motor Mount
Torque Strut Mount
Transmission Mount

Applicable Vehicles:
Fits for Ford Focus L4 2.0L Hatchback AutomaTrans 2005-2007
Fits for Ford Focus L4 2.0L Sedan AutomaTrans 2005-2007
Fits for Ford Focus L4 2.0L Wagon AutomaTrans 2005-2007

Installation Steps:
Step 1: Check for clearance against the firewall before attempting to raise the engine. Tearing radiator hoses, crimping AC lines or cracking distributor caps should be avoided.
Step 2: Secure the engine on a jack with various blocks of wood. Never jack an engine directly by the oil pan. The pan will bend and rupture.
Step 3: Loosen the engine from the mount bolts. Sometimes a long extension and universal joint is the way to go.
Step 4: Next, crawl under the vehicle and loosen the mount-to-frame bolts.
Step 5: Jack-up the engine a little at a time and remove the motor mount.
Step 6: Compare the old and new motor mounts. Transfer any heat or drip shields to the new mount.
Step 7: Thread in the mount-to-frame bolts before lowering the engine. This will simplify mount alignment.
Step 8: Lower the engine and fully tighten all bolts.
Step 9: Front-wheel-drive vehicles often have third "dog-bone" motor mounts.