مميزات خاصة

BST200 12V car battery tester shows you the basic battery parameters such as voltage, internal resistance, battery condition and charge status. In addition, BST200 also tells you whether you should replace or charge the battery.
Works with 12V lead acid batteries from 100 - 1100 CCA, including regular flood batteries, AGM flat plate batteries, AGM spiral batteries and GEL for cars, RVs, SUVs, motorcycles, boats, light trucks and even golf carts.
Gives you an accurate result in just seconds, such as CCA value, CCA rating, voltage, internal resistance, health and state of charge, based on the rating standard of CCA, CA, MCA, JIS, DIN, IEC, EN and SAE.
With the two test models "OUT OF VEHICLE" and "IN VEHICLE", you can test the battery both inside and outside the vehicle and get even more accurate test data. Plus, you do not need an internal battery and get power directly from the detected battery.
The small, compact design, large backlight LCD, clear keypad (UP, DOWN, ESC, ENTER keys) and menu-driven operation make it easy to use. Even a beginner can operate this battery tester effortlessly.. The device is equipped with reverse polarity protection and will not emit light, heat or sparks and will not discharge the battery. Safe for you, your cars, your batteries and the tester itself. Built-in 10 operating languages.. 24/7 TECHNICAL SUPPORT ANCEL‘s official store offers a 30-day money back guarantee, hassle-free warranty and lifetime customer support. For technical support and any problems with the order, please contact us via buyer-seller messages to solve the problem.

وصف

Feature:

1. Test 12V automotive cranking lead-acid battery, including ordinary lead-acid battery, AGM flat plate battery, AGM spiral battery, and Gel battery, etc.

2. Polarity reverses connection protection, the reverse connection will not damage the tester or affect the vehicle and battery. before testing.

3. The scope of application: 100-1100 CCA CA MCA JIS DIN IEC EN SAE.

4. Suitable for: Automobile factory, garage, the auto battery manufacturer, auto battery agent, DIY enthusiasts, etc.

Specification:

Test range: CCA100-1100, 30-100Ah.

Test result: SOH, SOC, CCA Value, IR, etc.

Test standards: CCA, CA, MCA, JIS, DIN, IEC, EN, SAE.

Working Temperature:0 to60℃ （32 to 140℉）
Storage Temperature:-20 to 70℃（-4 to 158℉）

Note：

1. Do not connect the tester to a voltage source greater than 18V DC; otherwise, you may damage the tester.

2. If you are testing inside a vehicle, make sure all accessory load is cut off, the key is not in the ON position and the door are closed.

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه