TIMELY CHECK THE HEALTH STATUS OF BRAKE FLUID, PROVIDING GUARANTEE FOR YOUR EVERY TRAVEL

Product Information
Size: 6.85*1.03*0.86 inch
Color: Black
Material: Metal, ABS
Packing: 1x Brake Fluid Moisture Tester

Warm Reminder
1. The batteries are not included in our package, please purchase two batteries of the correct voltage and type separately
2. After each test, use a dry cloth or tissue to wipe the liquid from the detector head clean, and put the protective cover on the probe, otherwise it will affect the results
3. When the battery voltage is lower than 2.6V the display will prompt, lower than 2.4V, the detector will automatically power off, then you need to replace the battery in time
4. Do not use the detectorpen if the screen does not display, you need to hold down the power key more than second,after the buzzer beeps and the screen lights up, you just can start testing
5. Please note that the numbers on the display are inverted when reading the values
6. When replace the batteries, rotate the battery cover counterclockwise, then remove the old battery and install the new battery according to the negative and positive instructions of the battery, finnally screw the lid back on
7. After cleaning,the test pen must be completely dry before use

Indication Instructions
Immersed the metal part of the detecting head into the liquid for 3 seconds until the display stabilizes
1. Green Backlight & No Beeps Sound
Display 0%-2%, brake fluid can still be used
2. Yellow Backlight & Beeps Slowly
Display 2%-3%, please change the brake fluid
3. Bright Red Backlight & Buzzes Rapidly
Display greater than 3%, please change the brake fluid immediately

Product Testing Parameters
Detection Range: 0%-4%
Error Range: 0.3%
Braking Fluid Type: DOT 3, DOT 4, DOT 5.1
Detection Frequency: 50Hz-60Hz
AC Detection Range: 12V~1000V/ 48V~1000V
Operating Temperature: 0-40°C
Storage Temperature: 10-50℃
Humidity: ≤0.95
Altitude: ≤2000m
Battery: 2x 1.5V AAA Batteries
Alarm Mode: Sound and Light Alarm&Display Screen Display
Illumination: White LED Light
NCV Sensitivity: S key Switching Sensitivity
LCD Indicator Screen: Fire Line Red / Zero Line or Ground Green
Zero Firewire Judgment: Strong Signal is the Firewire (According to the Signal Strength to Judge)