الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠.قد تحتاج إلى محول كهرباء
مميزات خاصة
The sensor shield breaks out all the PIO ports on the micro:bit control board into 3PIN interface (GND, VCC, Signal), very easy to connect the micro:bit control board and other sensor modules.
The microbit sensor shield extends some commonly-used serial communication interfaces into pin or female headers with 2.54mm pin pitch, such as I2C and SPI communication pins. So that this shield will allow communication between micro:bit control board and other communication devices.
You can power your micro:bit board through a yellow DC jack (DC 7-9V) or a mciro USB port (DC 5V) on the shield.
When power the sensor, you could select the supply voltage 3.3V or 5V via jumper cap V1 and V2.
Technical Support: If you encounter any problems during use, please feel free to contact us
وصف
Power input: yellow DC (DC7-9V) or micro USB port(DC5V) Voltage output: select 3.3V or 5V via jumper cap V1/V2 Comes with a power indicator Extends the PIO of micro:bit into 3PIN interface Serial communication pin I2C communication pin SPI communication pin Dimensions: 65mm x58mm x12mm Weight: 31g