Belt Cleaning:

1. Clean the belt and pulley should be a rag dipped in a little non-volatile liquid wipe test, do not diffuse soak in detergent or use clean wash belt, do not use sandpaper to wipe or use sharp objects to scrape the belt.
2. The belt must be kept dry before installation and use.

Belt Check:

1. Check straight belt for cracks or wear.
2. Check if each pulley is on the same plane.
3. Check the rest of the transmission components, such as the symmetry, durability and lubrication of the bearings and bushings.

Belt Test Run:

1. It is recommended to take the test run program, during the process should closely monitor the operation, to see whether there is abnormal vibration, listen carefully whether there is abnormal noise, check the bearing and motor heating condition.
2. For synchronous belts, there is very little slack during operation, so generally there is no need to readjust the tension, but it is still recommended to start the device and observe the performance.