Seco-Larm SD-9773-KNEVQ Enforcer Surface-Mount Wave-to-Open Sensor; Manual Override Button; Adjustable Sensor Range up to 6"; LED Illuminated Sensor Area; Aluminum Alloy and ABS Plastic Housing

The ENFORCER Surface-Mount Wave-to-Open Sensor with Manual Override Button is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms, schools, factories, or offices. A manual override allows for operation if the sensor is disabled

Key Features:
- Adjustable sensor range up to 6" (15cm)
- 1A relay, adjustable trigger duration 0.5~30 seconds or toggle
- LED illuminated sensor area for easy identification
- Selectable LED colors (turns from red to green or green to red) when sensor is activated
- Aluminum alloy and ABS plastic housing
- IP54 Weather-resistant for outdoor use

Specifications:
- Operating Voltage: 12~24 VDC
- Current Draw:Standby (red): 20mA@12VDC / 26mA@24VDC Triggered (green): 26mA@12VDC / 32mA@24VDC Standby (green):16mA@12VDC / 20mA@24VDC Triggered (red): 31mA@12VDC / 39mA@24VDC
- Relay Type: SPDT dry contact, 1A@24VDC
- IP Rating: Weatherproof IP54
- Response Time: 10ms
- LEDs - Standby: Red (reversible to green)
- LEDs - Triggered: Green (reversible to red)
- Output Time: 0.5~30 s, toggle
- Range: 1.56" ~ 6" (4~15 cm)
- Operating Temperature: -4°~131° F (-20°~55° C)
- Dimensions: 3.14 x 4.52 x 1.10 inches
- Weight: 0.59 pounds