VDD stabilizes 2.8 V output. Almost 150 mA can be used to power external components. If you want to bypass the internal voltage regulator, you can use this pin as a 2.8 V input and disconnect the VIN.
VIN This is the main 2.6 V to 5.5 V power connection. The SCL and SDA level shifters pull the I2C line up to this level.
Ground (0 V) connection of GND power supply. Your I2C control source must also share a common ground with the board.
SDA level conversion I2C data line: HIGH for VIN, LOW for 0 V
SCL level shift I2C clock line: HIGH is VIN, LOW is 0 V
XSHUT This pin is a low-level effective shutdown input; By default, the board pulls it up to VDD to enable the sensor. Drive the pin to a low level to put the sensor into hardware standby mode. This input does not perform level conversion.
Package includes :
3x GY-VL53L0XV2V L53L0X Time-of-Flight Distance Sensor