الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠.قد تحتاج إلى محول كهرباء
مميزات خاصة
[High Performance] Ultra-broadband, Low noise. Good flatness in the 100k-10GHz range. Gain: 21dB, OP1dB: 13dBm Typ. Can be used to replace ADM-8095, ADM-8625 modules
[USB Interface Powered] The ZK09-BM is a USB-powered RF low noise amplifier, adds a battery and reduces power consumption, making it suitable for portable use
[Built-in Battery] Built-in 300mAh battery, it has a flatter and more consistent gain, lower noise figure, smaller size, and longer battery life (Charging 210mA, Total 260mA, Battery life 5 hours)
[Application] Recommended for use as tinySA ULTRA 5.8GHz preamplifier(Unless specifically requested, please avoid using both the built-in LNA and external LNA of tinySA ULTRA at the same time). For RF & Software Defined Radio (SDR)
[Note] It is not recommended to employ a preamplifier in an environment with intense background noise. This might clog the receiver or cause the AGC circuit of the receiver to lower the reception gain, particularly in residential districts where medium and short waves are more prone to interference
وصف
ZKxx-BM Series - USB Powered RF Low Noise Amplifier
The ZK09-BM LNA Amplifier Module is a USB-powered RF low noise amplifier with built-in battery introduced by Zeenko. Based on the ZKxx-UM, it adds a battery and reduces power consumption, making it suitable for portable use. It has a flatter and more consistent gain, lower noise figure, smaller size, and longer battery life.
Specifications:
1. Item Type: LNA Low Noice Amplifier
2. Module Frequency Range: 10M-10GHz
3. Gain: 21dB
4. OP1dB: 13dBm Typ
5. Built-in 300mAh battery (Battery life: 5 hours)
6. Supply Current: Charging 210mA, Total 260mA
7. Recommended for use as tinySA ULTRA 5.8GHz preamplifier
8. Can be used to Replace ADM-8095, ADM-8625 Modules