الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠.قد تحتاج إلى محول كهرباء
مميزات خاصة
[High Performance] Broadband, low noise. Good flatness in the 1-6 GHz range. Gain: 20dB, OP1dB: 18dBm Typ. Can be used to replace QPL9503, QPL9504 modules
[USB Interface Powered] The ZK06-BM is a USB-powered low noise amplifier LNA module. Based on the ZKxx-UM, ZK06-BM adds a battery and reduces power consumption, making it suitable for portable use
[Built-in Battery] Built-in 300mAh battery, it has a flatter and more consistent gain, lower noise figure, smaller size, and longer battery life (Charging 210mA, Total 250mA, Battery life 6 hours)
[Application] Since the LNA in tiny SA ULTRA is effective only below 3.5GHz, adding an LNA can enhance high-frequency sensitivity. ZK06-BM is helpful for users requiring measurements at 5.8GHz (Unless specifically requested, please avoid using both the built-in LNA and external LNA of tiny SA ULTRA at the same time)
[Note] It is not recommended to employ a preamplifier in an environment with intense background noise. This might clog the receiver or cause the AGC circuit of the receiver to lower the reception gain, particularly in residential districts where medium and short waves are more prone to interference
وصف
ZKxx-BM Series - USB Powered RF Low Noise Amplifier
The ZK06-BM Low Noise Amplifier (LNA) Module is a USB-powered RF low noise amplifier with built-in battery introduced by Zeenko. Based on the ZKxx-UM, it adds a battery and reduces power consumption, making it suitable for portable use. It has a flatter and more consistent gain, lower noise figure, smaller size, and longer battery life.
Specifications:
1. Item Type: LNA Low Noice Amplifier
2. Module Frequency Range: 10M-6GHz (Good flatness in the 1-6 GHz range)
3. Gain: 20dB
4. OP1dB: 18dBm Typ
5. Built-in 300mAh battery (Battery life: 6 hours)
6. Supply Current: Charging 210mA, Total 250mA
7. Recommended for use as tiny SA ULTRA 5.8GHz preamplifier
8. Can be used to replace QPL9503, QPL9504 modules