VViViD's mission is to empower you to take care of your vehicle's maintenance yourself, saving you money, and ensuring the job is done with care and efficiency. That's why our oil extraction pump is manufactured for speed and ease of use. Its powerful 60W / 12 Volt motor extracts engine oil at approx. 0.2L/min, and diesel at approx. 1.5L/min! Light & portable, at only a few pounds weight, and small enough to hold in one hand, it barely takes any space in your garage, or car's trunk. Full instructions are included in the box, making oil extraction a simple task for any beginner. Before extracting the oil, run the vehicle's engine until it reaches approx. 40° to 50°C / 104° to 125°F to optimize the viscosity of the oil for a faster flow-rate (do not overheat oil as it may damage the extractor's seals). When this temperature is reached, switch off the engine. Follow the instructions to attach the tubing to the vehicle, and connect the pump to the car's battery terminals. Switch the pump on to extract the oil from the engine. As soon as no further oil is being pumped, switch the pump off. Clean after use by pumping some fresh oil. The process is simple and stress-free. So take charge of your vehicle's maintenance, and your wallet, with this powerful oil extraction pump, part of the VViViD motor tools line. Important: Use with only motor, diesel or heating oil. Not suitable for water, gearbox oil, or highly flammable liquids like gasoline, etc. The working period for this oil extractor should not exceed 30 minutes. After this period, please switch off the pump and let it cool down.