Product Description:

This is an essential automotive tool designed for the OBDII diagnostic link connector. It provides convenient and safe access to the OBDII connector, enabling easy monitoring of protocol, power, and ground signals. In case of unconfirmed signals, it can be connected to a multi-meter or oscilloscope for further testing.

Features:

No probing at OBDII connector required.
Easy access to 16 pins during scan tool communication.
LEDs indicate power and ground problems.
Mimics OBDII layout for quick reference.
Quick, safe, convenient access to chassis ground and power.
Uses safety banana sockets for 4mm plugs.

Pins Definition:

Pin 1/Pin 3/Pin 8/Pin 9/Pin 11/Pin 12/Pin 13: OEM Discretionary.
Pin 2: SAE-J1850 PWM PROTOCOL LINE(+).
Pin 4: Chassis Ground.
Pin 5: Signal ground.
Pin 6: CAN High (ISO 15765-4 and SAE-J2284).
Pin 7: K-line for ISO 9141-2 and ISO 14230-4.
Pin 10: SAE-J1850 PWM PROTOCOL LINE(-).
Pin 14: CAN Low (ISO 15765-4 and SAE-J2284).
Pin 15: L-Line (ISO9141-2 and ISO 14230-4).
Pin 16: Battery +.

Led Indicator:

Yellow LED (for Pin 2/6/7/10/14/15): Lights up to indicate communication with scan tool and protocol identification.
Green LED (for Pin 4/5): Lights up to show good ground.
Red LED (for Pin 16): Lights up to show power.

Product Parameters:

Diagnostic port: OBDII
Working voltage: DC 8 V-30 V
Load: 2.0 A
Operating temperature: -20°C-70°C (-4°F-158°F)
OBDII extension cable length: 90 cm
Item Weight: 0.82 pounds
Product Dimensions: ‎180 x 80 x 35 mm
Bulb Type: ‎LED

Package Content:

Automotive OBDII Protocol Monitor
Instruction Manual