Ranging measurement is available through the sensor's I⊃2;C (TWI) interface,which can also be used to configure sensor settings.
The sensor provides 2 additional pins: a shutdown input and an interrupt output.

Application: Suitable for user detection PC,laptop, robots,drones obstacle detection.

PIN Description:
VDD Regulated 2.8 V output. Almost 150 mA is available to power external components. (If you want to bypass the internal regulator,use this pin as a 2.8 V input with VIN disconnected.)

VIN:power supply connection. (The SCL and SDA level shifters pull the I2C lines high to this level.)

GND: Ground (0 V) connection for your power supply. ( Your I2C control source should also share a common ground with this board)

SDA Level-shifted I²C data line: HIGH is VIN, Low is 0 V
SCL Level-shifted I²C clock line: HIGH is VIN, Low is 0 V

XSHUT:An active-low shutdown input.
By default,the board pulls it up to VDD to enable the sensor.
Driving this pin low puts the sensor into hardware standby.
This input is not level-shifted.

Package:
2x VL53L0X Time-of-Flight Ranging Sensor