Specification:
Material:stainless steel
Capacity:300g
Voltage:110
Rated power:1300w
Fineness:50-300Mesh
Rotation speed:28000r/min
Working time:5 minutes;
Interval:5 minutes
Operations Guide:
1. Open the upper cover and put the material inside;
2. Close the upper cover tightly;
3. Plug in and turn on the timer switch, then turn on the switch for grinding (Rolling sound will be heard );
4. Turn off the switch, (When you hear the sound rolling evenly, the material has been grinded into powder, then you can turn off the switch);
5. Disconnect power supply before opening;
6. Open the upper cover and brush the powder out.
Important Attentions:
⚠ Disconnect power supply before opening.
⚠ The spice grinder materials ready for grinding must be dry. And wet, moisture or oil materials are not suitable to be grinded into powder.
⚠ Each input material shall not exceed the rated weight or half capacity of crush cabin so that there is enough space for powder.
⚠ After switch on, if finding the material is wet or excessive in weight, it will jam the blade and stop the motor by giving warning noise.So must plug out immediately to prevent motor from being damaged. And remove the jammed object. Then restart grinding.
⚠ The spice grinder grinding work usually needs 30 seconds to 1 or 2minutes. Over time working will cause bearing overheating.