Kithouse K380 Rechargeable 2.4GHz Dual Wireless Microphone With Receiver - No need to set! No need to buy batteries! Just plug and use!
How to use Kithouse K380 Rechargeable 2.4G Dual Wireless Microphone with Speaker?
1)Power on mic/receiver, they will connect each other automatically though 2.4G technology
2)Plug the receiver into the Speaker with 1/4"(6.35mm)port, now you can use the mic
How To Pair/Reset K380S Microphone with Receiver?
1. Power off both Mic & Receiver. Firstly, hold press the PAIR button in Mic tail, then hold press Mic's Power Key until you see"PAIR" flashes. This means Mic has entered Pairing mode. Another mic is the same procedure.
2. Long press Receiver's Power Key, you will notice RX MIC A/B Indicator will quickly flash 3 times then out. This means RX has detected Mic A/B.
3. Now short press Mic's Power Key to comfirm pairing. If Receiver's RX MIC A/B Indicator always on, that means Mic A/B & Receiver pairing successful. Otherwise, repeat the whole pairing process.
Technical Parameters:Frequency
Band: UHF
Work Channels: 10 UHF channels(CH01-CH10)
Frequency Response: 50Hz - 18kHz
SNR: >70dB
Distortion: Latency: UHF Microphone & Receiver Range: ≥50ft Indoor(15m) Up to 100ft Outdoor
Microphone Battery: 2 AA battery
Receiver Battery: Built-in battery (can be charged by a DC5V mobile phone power adapter)
Microphone Working Time: About 40 Hours(Full Charged)
Receiver Working Time: About 4 Hours(Full Charged)
Working distance: >20 meter
Simultaneously Using Max Sets: 10 sets at max(Each Set Using In Different Channel)
Package List: 1 * K380 Dual Wireless Microphone With Receiver 1 * Data cable 1 * Dual USB Charging Port 1 * User Manual2*Microphone