الاجهزه الالكترونيات الامريكية قد تحتاج الى محمول فولت من ١١٠ الى ٢٢٠.قد تحتاج إلى محول كهرباء
مميزات خاصة
The power charger is specifically designed and tested for the new Raspberry Pi 4 4B, offering maximum stability and reliable operation.
Quality assurance-the adapter is manufactured using the highest quality materials and is protected against incorrect voltages, short circuit, and internal overheating
The 3.3A current can provide enough current to ensure that the Raspberry Pi can operate properly during the complex experiment at each station.
Multiple protection designs: over voltage protection, under voltage protection, short circuit protection, over heat protection, over current protection
The power supply with ON/OFF switch for easy control of charge status of your Raspberry Pi and can effectively reduce wear and tear of the Raspberry Pi power port caused by plugging.
وصف
Specification:
Input voltage: AC 100V-240V 50-60Hz
Output voltage: DC5V
Rated output current: 3A
Work efficiency: 90%
Temperature coefficient: ±0.02%℃
Start-up time: Output ripple and noise: 100mVp-p
Output voltage accuracy: 95%
Voltage adjustment rate: 5%
Insulation strength: input-output> AC 2000V/10 seconds
Insulation resistance: input-output >50MΩ, DC 500V
Working temperature: 0～45℃, 20%～90%RH
Storage temperature -20℃～85℃ 10%～95%RH
Output DC cable: 1 meter
Output DC interface: Type-C USB
Package Includes:
1 x USB Power Adapter
1 x 1m USB Type C cable with on/off power switch
لوحة توسيع لوحة التوسع لبلوك المحطة RPi GPIO من Treedix متوافقة مع Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W
KWD 4.500
تريدكس 2 قطعة من لوح الرسم البيوي GPIO قبعة مع دبوس أنثى موصل PCB نماذج مجلس بي زيرو متوافق مع راسبيري بي زيرو (غير لحام
KWD 4.500
شاشة Treedix 3.5 بوصة TFT LCD وحدة شاشة ملونة 320 × 480 متوافقة مع Arduino UNO R3 Mega2560
KWD 8
تريديكس وحدة لوحة الاختراق مع لوحة دبوس لتينسي 4.1/3.5/3.6 متوافقة مع اردوينو
KWD 6
