Made in the USA. Get that perfectly centered hole in your U.S. quarter, half dollar, and Morgan coins to make double sided coin rings. Spacers are required in this punch to center coins in the punch. Punch and die sizes included are: 3/8" 7/16" 1/2" The punches and dies can be interchanged for each coin if different sized holes are desired in the coins. The punch sizes are 3/8", 7/16" and 1/2". The housing has been zinc electroplated to resist rust, knurled top and bottom for ease of tightening and a quick thread pitch to lock down the coin quickly and tight. Comes with the housing and three sets of punches, dies and zinc electroplated spacers for U.S quarters, halves, and Morgan dollars only.