مميزات خاصة

1. Hot Adhesive and Cool Release: This 3D Printing Adhesive Glue is engineered to enhance your print surface, aim to solve 3d printing project warping or detaching from your printer bed or model removal after printing.
2. Works With Various Filaments: Works with PLA, ABS, PETG, ASA, HIPS and TPU. Other filaments are still being tested.
3. Use on Multiple Bed Surface: Works with many bed surfaces including borosilicate glass, PEI, blue painter's tape and other commonly used Smooth PEI PET PEO H1H build surfaces.
4. Easy to Use and Clean: Water-soluble glue, the platform can be cooled and cleaned with water after printing. Usage method: 1. First Wipe off dirt and dust on the 3d printer bed. 2. Pull off the outer cap directly. 3. Evenly use the glue onto the hot bed. 4. Close the lid after using. When your printings done, wipe away with water and a paper towel. A quick wash refreshes the build surface. Reapply the adhesive and keep printing!
5. Long Lasting: Can be easily touched-up, enabling multiple prints with minimal usage a thin coat, which is highly practical and helps the 3D printed parts adhere to the building board during the printing process.

وصف

This glue applies in a sort of milky white color and dries completely clear. Once dry, the bed adhesion is fantastic. Sometimes PEI can lose adhesion where only small parts touch the build plate. Instead of using a raft or a brim that takes forever to remove cleanly, this glue will ensure a clean print that does not break loose from the print bed. If you are wondering if this glue is any good, stop wondering.

Package Content: 1x 100ml 3d printer bed adhesive
Made from natural, renewable resources
Wide Compatibility: The 3D printer adhesive glue for hotbed is suitable for 3D printer heating bed, including PEI plate, carboon crystal glass, aluminum and glass plate, etc. 3D printing material consumables such as PLA, ABS, PETG can be selected, and the effect is obvious.

مرحبًا،

بحث

مميزات خاصة

وصف

منتجات شبيهه