Upgrade your refrigerator with this genuine factory-authorized control board, designed to seamlessly integrate and provide reliable performance. This main control board, compatible with GE refrigerators, is an essential component that regulates various functions, ensuring optimal operation. Featuring a compact yet robust design, this control board is engineered to withstand the demands of daily use. With its precise circuitry and advanced components, it efficiently manages temperature control, defrost cycles, and other critical operations. Backed by rigorous quality testing, this control board offers dependable service and longevity. Restore your refrigerator's functionality and enjoy uninterrupted cooling with this genuine replacement part. Dimensions: 7.5 x 5.5 x 2 inches. How to install WR55X10942 main control board STEP1: Disconnect power to the refrigerator and remove existing main board. TOOLS:1/4” nut driver,wire cutters (for some models) STEP2：Eliminate thermistor wire in pin 2 of J1 connector (see note below) if no wire in pin2, proceed to step 3.Note: This step is ONLY applicable for the following models:ALL BOTTOM FREEZER models ENCODE models with the following serial number prefixes：TD2 VD2 ZD2 AF2 DF2 FF2 GF2 HF2 LF2 MF2 RF2 SF2 STEP3: Install new main board.(1) Reconnect the electrical connectors by gently pushing the connectors onto the terminals (2) The connectors on the new board may be in a different order/place than the old board (3) When replacing back panel,make certain to capture eyelet of ground wire with back panel screw. (4) Make sure the ground wire is not pinched by the back panel and is within the enclosure. STEP4: Cut green wire in capacitor board (ONLY applicable for BOTOM FREEZER model) STEP5: Check operation.Make sure the compressor and evaporator fan turn on.Check that the temperature board is functioning.