Material:
High quality waterproof vinyl .designed to withstand the elements of nature and of course the mighty carwash.

Pacakge Listing：
Including2 pcs of rear side window american flag decals, 1 pcs scraper, 1 pcs installation step-by-step diagram.

Perfect Fit:
Compatible with Toyota 4Runner 5th Gen 2010-2024.

Installation:
Step 1
First clean the window surface to ensure that no stains remain, fix the decal.
Step 2
Start from the left, tear off the left side of the tape, to the middle of the tape as the boundary, cut off the left side of the third layer of the backing paper, the left side of the sticker on the glass, and then use the installation scraper to slowly scrape the sticker flat .
Step 3
Tear off the middle and the right side of the tape, slowly tear off the right side of the third layer of the backing paper, while using the installation scraper to scrape flat stickers (tear and scrape synchronous operation) .
Step 4
Slowly scrape the decal flat with the installation scraper.
Step 5
Select one end to start removing the transfer film, this process must be slow, the transfer film has a certain adhesion, tearing the speed too fast may tear off the decal together or damage the decal.
Step 6
After the transfer film is removed, wrap the scraper with a towel and reinforce the decal again.
Installation Tips:
Decals installed in two modes : dry and wet . Dry installation maybe produce some small amount of air bubbles. Wet installation is better and do not produce air bubbles, but you must wait 6 to 8 hours before removing the transfer film. The transfer film has a certain adhesion, so the process of tearing the transfer film should be as slow as possible. Too much force maybe cause the decal to come off or tear. If all of the transfer film is torn off, wrap the scraper in a towel to reinforce the decal.