Description:
Operating voltage: DC 5-12V(5V 6V 9V 12V)
Operating current: 5V, forward 4mA, reverse: 36mA;
12V, forward 6mA, reverse: 44mA
Load voltage: DC 1-48V or AC 85-265V
Load current: 2A
Forward time: 5000 seconds, 0.1 seconds step
Reverse time: 5000 seconds, 0.1 seconds step
Size: 54*22*15mm / 2.12*0.87*0.59in
Weight: Approx. 15g
How to use:
VIN connected to the positive of power supply , GND connected to the negative of power supply;
P+ connected to the positive of motor power supply, P- connected to the negative of motor power supply;
M + & M- connected to both ends of the motor
After power, D1 flashes for 3 times, off, M+ output positive, M- output negative, motor forward; After a time delay T1, on, M+ output negative, M- output positive, motor reversal; After a time delay T2, off, M+ output positive, M- output negative, motor forward; And so on.
T1: motor forward delay time, default 0.1-5000 seconds adjustable (step 0.1 seconds)
T2: motor reverse delay time, default 0.1-5000 seconds adjustable (step 0.1 seconds)
By "Time multiple selection" setting, the maximum delay is up to 40,000 seconds
How to Set Up:
After power on, D1 3 blinks, enter the "work mode"
on Reversal, off Forward
Press and hold the key for 2 seconds, D1 on, enter the "setup mode"
off, It's forward "setup mode"
In forward "setup mode", continuously KEY twice, D1 off, enter "Standby timer mode"
In the "Standby timer mode" , KEY to start timing(enter "Timing Mode")
D1 flashing means it is timing("Timing Mode")
KEY again to stop the clock(exit "Timing Mode")
D1 flashing time is forward time(T1)