Tip:The reborn needle is a consumable item.Even a very skilled player will break the reborn needle.In the process of operation,you must be careful and patient,and practice makes perfect,which can reduce the loss of needles.
Tutorial:If you find that you are breaking needles,make sure you are using the right size needle,reduce your plug size and be careful of how hard you push the plug into the head.some dolls have harder heads and will require heat to soften.If you do not soften harder heads while rerooting,then you run the risk of breaking needles faster.
Some dolls have harder heads and will require heat to soften or the tac method.If you do not soften harder heads while rerooting,then you run the risk of breaking needles faster.For the tac method use a thumb tac.Push tac in,prepare plug,remove tac,push in plug.The hole will expand preventing the needles from breaking.After 30 plus minutes the hole will shrink down.
***To avoid snapping needles it's important to keep the needle length relatively short,a longer needle protruding from the tool is more likely to bend or snap.To avoid breaking the eye of the needle don't overload it with hair,a few strands per plug should be adequate - but experience and experimentation is key!If in doubt start with a smaller size,too large a needle may risk tearing the scalp,but smaller needles will hold less hair and can be more prone to breakage***
Please note that for beginners or when rerooting harder doll heads,you may need to use multiple needles on one head.
وصف
If your doll head is relatively hard,you can use electric hot air to soften the head to the hair planting.And don't forget to punch with awl first.