Innovatively endowing M.2 heat sink with real-time temperature display function and 1MS ultra-high temperature sampling rate.
The bottom plate can fully cover the main control and hard disk storage particles, effectively controlling the high temperature of the hard disk under continuous read and write conditions, and maintaining the efficient working state of the hard disk.
Supports installation of single/double-sided chips and M2 hard drives with specifications such as 2280 and 22110.
Parameters:
Material: Aluminum alloy
Applicable specifications: Aoteng memory, 2280/22110 M2 solid-state drive
Applicable: Suitable for heat dissipation of M.2 type hard drives with single and double-sided particles.
External dimensions: Please refer to the second dimension diagram
If the device is powered on, it can be connected to a multi-channel remote control light controller (DK301-16). Please insert the 3P interface into the corresponding interface position as shown in the diagram (the multi-channel controller needs to be purchased separately by the customer).
1. The display screen is made of fragile material, please do not press it hard.
2. Convenient power access: Simply insert the power supply interface into the corresponding interface slot.
3. Accurate display: The temperature display resolution is ± 0.1 ℃.
4. Instant display: Temperature limit display, real-time data refresh.
5. Use the included screws to install the cold head. Do not replace it randomly to avoid damaging the hardware.
6. When using, use a silicone gasket to fully cover the back of the hard drive to avoid short circuiting and damaging hardware.
