The DM456AI has built with a pulser already, you can control two Max current 2.8A stepper motors by PLC or potentiometer at same time, even you can run two motors without a controller. Eight currents and eight speeds can be seleted. Two digital input signals control the start/stop and direction seperately. It was widly used in the application of band carrier.

Note: When connect two motors, the driver will allocate 50% current to each motors averagely, and two motors will have same movement.

Key Features

*24VDC Singal Voltage
*Variable Speed Stepper Driver
*8 Currents and 8 Speeds Available
*Input Voltage +20~40VDC, Max current 5.6A
*ENA Controls Start/Stop, DIR Controls Direction
*Match for Nema 14, Nema 17, Nema 23 Stepper Motors
*PLC or controller (with 0-10V analog output or separate potentiometer)

Operating Environment and other Specifications(Tj = 25℃/77℉):

*Cooling: Natural Cooling or Forced cooling
*Environment: Avoid dust, oil fog and corrosive gases
*Ambient Temperature: 0℃ － 65℃
*Humidity: 40%RH－90%RH
*Operating Temperature: -10℃ － 45℃
*Storage Temperature: -20℃ － 65℃
*Weight: Approx.210g (7.4oz)