Module description:
The voltage to PWM module V-PWM can convert 0-5V-10V voltage into 0%-100% PWM output, and adjust the PWM duty cycle by adjusting the voltage. Can be used for motor control or other places where PWM is required. The module size is small and easy to apply in different places.

Product parameters
1. Adopt single chip embedded technology;
2. Easy to operate, can be fine-tuned by potentiometer;
3. Select different input voltage ranges by short-circuiting;
4. The module is small, easy to carry and use;
5. Module working voltage: DC5V-12V;
6. Conversion range: 0-5V/0-10V voltage is converted to 0%-100% PWM;
7. Allowable error: 1%-3%;
8. Output PWM amplitude: 5V
9. Output PWM frequency: about 50KH

Instructions for use:
Connect the working voltage to VCC and GND, do not reverse the connection, so as not to damage the board and devices. A controllable voltage is connected to the VIN terminal, and the voltage range is divided into 0-5V and 0-10V according to the selected mode. The output at the PWM terminal is PWM. The duty cycle can be adjusted by adjusting the voltage. Accuracy can be controlled by adjusting the potentiometer.

Package includes:
2 x Voltage to Pwm Module 0-5V 0-10V to 0-100%
4 x 50cm/19.6inch 24AWG Cable