Mini PCIe TO M.2 adapter for Raspberry Pi 5, supports NVMe Protocol M.2 solid state drive with high-speed reading/writing, compatible with M.2 solid state drive in 2230 / 2242 size, supports Gen2 and Gen3 modes, and supports booting PI5 from SSD.

Features
Only compatible with Raspberry Pi 5.
Support NVMe protocol and M.2 solid state drive protocol, high-speed read/write, with high work efficiency.
Support PCI-E×1 Gen2 or Gen3 modes.
Compatible with M.2 solid state drive of 2230/2242 sizes.
Onboard working indicator lights, with PWR on continuously when powered, and ACT blinking during read/write.

Comes with Online Tutorial and Online Development Resource, Please check: n9.cl/0vf31

Note: As the Raspberry Pi does not support NVME booting, the config text should be modified.

Load

1. Enable PCIe interface: Connect the hardware and the PCIE interface will automatically open as the latest system detects the hardware. If it does not open, you can execute: add "dtparam=pciex1" in the /boot/firmware/config.txt
2. PCIE selects GEN2 mode by default. If PCIE gen3 is needed, you can add the following content in /boot/firmware/config.txt: dtparam=pciex1_gen=3
3. Reboot the Pi5 after modifying, and then the device can be recognized.
4. Partitioning: If partitioning and formatting have already been performed on another platform, skip this step. Caution: Partitioning and formatting will erase all data on the SSD, so proceed with caution.
5: Format
6: Load

Package Content

PCIe TO M.2 MINI x1
16P-Cable-40mm x1
2*3 Pin header x1
Screws pack x1