This bundle includes the HEATKILLER Tube Reservoir and D5 Vario pump. The HEATKILLER Tube Series is a modular series of high end reservoirs with a glass tube made from borosilicate glass. It has some outstanding features which are listed here. Borosilicate glass tube Borosilicate is a glass with very high chemical and thermic resistance. It is scratch-resistant and has very low heat expansion. These outstanding features make borosilicate an ideal material for reservoirs. Reservoir Technical data Material cover: POM Material struts: black anodized aluminium Tube: borosilicate glass Material bottom: POM Material Inlay: stainless steel Measurements (L x W x H): 70 x 70 x 253,4 mm Tube length: 150mm Tube diameter: 65mm Capacity: aprox. 375ml Weight: aprox. 790g Seal: NBR, VMQ Connection thread: 2x G ¼ inch (DIN ISO 228-1) The WCP D5 is a DC pump using the spherical motor design as developed by Laing. The only moving part in a spherical motor pump is a spherically shaped rotor/impeller unit, which is seated on an ultra-hard, wear-resistant ceramic ball. Pump Specifications Dimensions (LxWxH): 65 x 65 x 57mm Motor design: Electronically commutated spherical motor Materials: Stainless steel 1.4571, PPS-GF40, EPDM O-Rings, aluminium oxide, hard carbon Rated voltage: 12V DC Power consumption: 23 W Voltage range: 8-24V DC Pressure head at 12 V: 3,7 m Max. flow rate: 350 l/h Acceptable media: Water, water-glycol mixtures Max. system temperature: 60°C Max. system pressure: 1,5 bar Power supply: 4Pin Molex Rotational speed monitoring: yes (via 3Pin Molex) PWM: no Model: TR-60255-60235