1.47inch LCD Display Module, Rounded Corners, 172×320 Resolution, SPI Interface

Specifications
Working voltage: 3.3V/5V (please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly)
Display Panel:IPS.
Driver:ST7789V3.
Operating voltage:3.3V / 5V
Resolution: 172 x 320 pixels
Communication Interface:4-wire SPI
Display size :17.39 x 32.35mm
Pixel pitch :0.0337 x 0.1011mm
Dimensions:22.0 x 38.5mm
1.47inch LCD Display Module,Embedded ST7789V3 Driver.
Controlled via SPI Bus: supports controller boards like Raspberry Pi/Arduino/STM32

LCD and the controller

The built-in controller used in this LCD is ST7789V3, which is an LCD controller with 240 x RGB x 320 pixels, while the pixels of this LCD itself are 172(H)RGB x 320(V). There are two types of horizontal and vertical screens, so the internal RAM of the LCD is not fully used.
The LCD supports 12-bit, 16-bit and 18-bit input color formats per pixel, namely RGB444, RGB565, RGB666 three color formats, this demo uses RGB565 color format, which is also a commonly used RGB format
The LCD uses a four-wire SPI communication interface, which can greatly save the GPIO port, and the communication speed will be faster.

Online Tutorial/Online Document: n9.cl/jdjmj

Package Content
1.47inch LCD Module x1
PH2.0 cable x1