Specifications:
Applicable voltage: 36V
Applicable power: Maximum working current: 30A
Continuous maximum current: 20A
Overdischarge voltage: 2.6v
Overcharge voltage: 4.25v
Charging current: Maximum 10A
Balance voltage: 4.2v
High temperature discharge: 75
Low temperature : - 7
Weight: 46g

Board Wiring Steps
1. Firstly connect the batteries in series.
2. Ensure that the voltage of each string is the same (the differencebetween the highest voltage and the lowest voltage is preferably within0.1V), and the voltage range is between 3.2-4.0V.
3. Firstly connect the distributed cable, connect according to the diagram, and insert the cable port into the board port after checking it is correct(first connect the battery, then insert the board, the step cannot bereversed).
4. Check whether the total positive voltage of the C-port and P-port to thebattery is equal to the total voltage of the battery. If they are equal， theboard is working normally.
5. Solder the battery negative B- to the port marked B-on the board.
6. Both the battery output negative electrode and the charging negativeelectrode of the same port board are connected to the port marked C-on the board (the P-port is just floating)
7. Separate port (different port) board, the battery output negative pole iswelded P-, and the charging negative pole is welded into the port marked C-on the board.

Package included:
1 x Board
1 x Cable