The main body uses rubber with fiberglass inside and imported canvas on the teeth for strength and durability.

Belt Cleaning:
1. Clean the belt and pulley should be a rag with a little non-volatile liquid wipe test, do not diffuse soak in detergent or use cleaning wash belt, do not use sandpaper to wipe or use pointed said object to scrape the belt.
2. The belt must be kept dry before installation and use.

Belt inspection:
1. Check the belt for cracks or wear.
2. Check whether each pulley is on the same plane.
3. Check the rest of the drive components, such as the symmetry, durability and lubrication of the bearings and bushings.

Belt test run:
1. It is recommended to adopt the test run procedure, during which the running condition should be closely monitored, to see if there is any abnormal vibration, to listen carefully if there is any abnormal noise, and to check the heating condition of the bearings and the motor.
2. For timing belts, there is very little slack during operation, so generally there is no need to readjust the tension, but it is still recommended to start the device and observe the performance.