Description:
1.Driving Port Signal Voltage:3.3-24V
2.Output voltage range: 3.6-30V(The output current depends on the specific situation but not over 10MA. When the total power is fixed, the voltage and current are inversely proportional)
3.Jumper Cap Can Achieve Output Port Is High POtential Or Low Output
4.Onboard 2-Channel 817 Are Independent:can achieve different voltage control at then same time

NOTE:
The input port is shared with GND;
The output ports are independent of each other;
It is optocoupler output.V and G will be connected after input valid signa in input port

Package Included:
5 x PC817 2 Channel Optocoupler Isolation Board
1 x 19.6inch/50cm 24AWG Wire