The Everbilt 1/2 HP Submersible Sump Pump is built with an aluminum motor housing for efficient motor cooling. The pump is available with a tethered float switch requiring an 18 in. minimum diameter wide sump basin. The motor is built with thermal overload protection. 1-1/2 in. FNPT discharge Semi-open thermoplastic impeller passes 3/8 in. solids Submersible for quiet operation Aluminum motor housing for efficient motor cooling Continuous duty, efficient 115-Volt PSC motor for lower carbon footprint; higher efficiency using less energy to operate 8.25 ft. cord length Pumps up to 2400 GPH at 10 ft., outperforms the competition Discharge Flow @ 10 ft. (gallons/hour): 2400 Maximum Working Temperature (F): 100 Product Weight (lb.): 8.82 lb Cord Length (ft.): 8.25 Impeller Material: Plastic Pump Switch Type: Tethered Features: Bottom/End Suction,Non-Clogging,Self-Priming,Solids Handling,Submersible,Thermal Overload Protection Minimum working temperature (F): 35 Maximum Horsepower (hp): .5 Discharge Flow @ 0 ft. (gallons/hour): 2800 Amperage (amps): 5.2 A Power Type Required: AC Housing Material: Aluminum Voltage: 115v Discharge Flow @ 15 ft. (gallons/hour): 2100 Sump Pump Outlet Diameter Type: 1-1/2 FPT Certifications and Listings: CSA Certified Product Depth (in.): 6.3 in Switch-On Height (in.): 11.81 Product Height (in.): 10.63 in Switch-Off Height (in.): 3.94 Product Width (in.): 8.27 in Maximum Pumping Height (ft.): 24