Rainbow 3D Windows films are very easy to use. The beautiful privacy glass stickers are a magic to your eyes. Because of their versatility, you can paste films on your doors and windows to give a brilliant look to all of your rooms, office or store.

While you will enjoy the privacy of these windows films, you will also be able to see light. In fact, while you are inside your house, you will be able to see a shape of someone knocking on your door.

To apply the films on your windows, you need to clean your glass first and then paste the peeled, smooth side of the films onto them. The easy-to-apply films can be pasted, removed and reused as often as you wish without leaving any stain on the windows.

Choose your favorite color of Anti UV floral tulip windows film , which will block out the sunrays from damaging your furniture.

Installation Instructions：(Teamwork will be more helpful!)

1. Clean the window thoroughly. Make sure it is smooth and clean and free of any dust.
2. Measure the size of the window and trim the film to the desired size. Leave an extra 1-2 cm margin on each side to allow for adjustment.
3. Peel off the transparent protective film. If it is difficult to remove the protective film, you can rub the corner of the film for a while to make it easier to peel off the backing. Make sure you have removed the protective film before installation. (Very important!!!)
4. Spray plenty of water on both the smooth side of the film and the windows.
5. Install the smooth side of the window film onto the window.
6. Use a squeegee or cleaning cloth to remove excess water and any air bubbles, making sure there are no air bubbles or water left behind.
7. Cut off the excess window film.
8. Wipe clean the surface of the installed window film. And you are well done!