SPECIFICATIONS:
Operates from 4.8-60 V
0V with optional auxiliary battery
Measures 0-200 A, resolution 0.01A;
0-60 V, resolution 0.01V;
0-6554 W, resolution 0.1W;
0-65 Ah, resolution 0.001Ah;
0-6554 Wh, resolution 0.01Wh;
Functions “Watt Meter” and Power Analyzer
Measures EIGHT parameters key to electric power safety & performance, Use it to: Prevent peak currents damaging battery. Motor
Control, motors, wiring and connectors. Verify sufficient operating voltage under load. Set cutoff voltages, cheek battery capacity &
health. Balance battery cells. Confirm proper battery charger operation. Detect receivers and actual operating currentso as to make
sure whether an UBEC is needed.
DC amp meter power analyzer - automatic detect and continuously display a real-time of Current (A), Voltage (V), Watts (W), Amp-hours (Ah), Watt-hours (Wh), Peak Amps (Ap), Minimum Volts (Vm), Peak Watts (Wp); New alarm function, when the amp is over 200A, the current display will flash to alarm
Sensitive digital LCD screen display - easy to read the parameter through the clear and bright blue backlight LCD screen; low power consumption of 6 mA, more efficient than any other LED meter.
Multifunctional Tester: Evaluate RC battery charging efficiency.Measure power and energy consumption of any battery powered device. Predict model airplane flight time,Choose the best propeller/most efficient motor .Check for wiring and connector power loss.Ensure peak currents are safe for motor, ESC & Battery as well as wiring and connectors.
Notice: This watt meter was designed to be safe in systems unsing less than 60V and carrying current up to 150A. DO NOT EXCEED THE LIMITES!