Warning: The positive and negative poles of the power input cannot be connected incorrectly

Model: IPS-S1
Input Voltage: 7-29V
Maximum current: 20 Amp
Receiving Frequency: RF433MHZ
WIFI Standard: Wi-Fi 2.4ghz b/g/n
Remote Control Battery: 23A 12V
Working Temperature: -20°C~ +70°C
Storage Temperature: -20°C ~ +90°C
Working Humidity:
 Motor Control:
1. Control box button (B1 Motor Forward, B2-Motor Reverse）
2. 3-key Remote Control (Forward-Stop-Reverse) Press once to continue working.
3. 2-key Handle Controller (Forward-Reverse) to start working, release to stop
4. RS485 serial port control (code: Forward-Stop-Reverse)
5. Photoelectric Signal Control (when encountering signal motor forward, After the signal disappears motor reverse)

 Programming Control: (For specific settings, please read the user manual in detail)
Press the K1 button for 3 seconds to set the Forward time, stop time, and Reverse time of the photoelectric signal
Press the K2 button for 3 seconds to set the motor forward current, motor reverse current, overcurrent rebound/stop, and motor start filtering time
Press the K3 button for 3 seconds to set the motor's forward running time and reverse running time

Function protection:
Motor forward current protection
Motor reverse current protection
Motor rebounds/stops when encountering resistance
Regularly disconnect the relay (to prevent continuous power on)