1 قطعة GY‑61 ADXL335 3‑5V مقياس التسارع ثلاثي المحاور وحدة زاوية الميل مقياس التسارع وحدة استشعار زاوية الميل وحدة زاوية الجاذبية الرقمية مستشعر زاوية الميل وحدة زاوية الميل
【Description】The ADXL335 is a small, thin, low-power, complete three-axis accelerometer that provides signal-conditioned voltage output and can measure acceleration in the full scale range of as little as 3g.
【Measurement】It can measure static gravitational acceleration in tilt detection applications, as well as dynamic acceleration due to operational shocks or vibrations.
【Specification】The ADXL335 is available in small size, thin, 16-pin, 4mmx4mmx1.45mm plastic pin architecture chipscale package (LFCSP_LQ). Power supply :3~5V. Power supply current :400uA. Communication interface: analog output. Operating temperature :-40°C~85°C. Dimensions (L * W * H):15.7mmx20.3mmx11.6mm.
【Pin Definition】VCC: Power supply range 3-5v. X_OUT: indicates the X-axis output. Y_OUT: Y axis output. Z_OUT: Z-axis output. GND: Power source.
وصف
Description:The ADXL335 is a small, thin, low-power, complete three-axis accelerometer that provides signal-conditioned voltage output and can measure acceleration in the full scale range of as little as 3g. It can measure static gravitational acceleration in tilt detection applications, as well as dynamic acceleration due to operational shocks or vibrations.The user selects the bandwidth of this accelerometer using the capacitors XOUT, YOUT and ZOUT on the CX, CY and CZ pins. The bandwidth can be selected according to the application, the bandwidth range for the X and Y axes is 0.5Hz to 1600Hz, and the bandwidth range for the Z axis is 0.5Hz to 550Hz.The ADXL335 is available in small size, thin, 16-pin, 4mmx4mmx1.45mm plastic pin architecture chipscale package (LFCSP_LQ)Power supply :35VPower supply current :400uACommunication interface: analog outputOperating temperature :-40C85CDimensions (L * W * H):15.7mmx20.3mmx11.6mmPin Definition:VCC: Power supply range 3-5vX_OUT: indicates the X-axis outputY_OUT: Y axis outputZ_OUT: Z-axis outputGND: Power source