أداة ضغط فرجار الفرامل من Ouzorp، أداة ضغط فرجار الفرامل 360 درجة قابلة للتعديل، أداة توزيع مكبس فرجار الفرامل مع شماعات فرجار مزدوجة، أداة ضاغط مكبس الفرامل
Universal brake caliper press tool constructed from high quality carbon steel and heat treated for strength and durability, not easy to bent. Rivet-reinforced non-slip handle, safer, comfortable and effectively extended service life.
Brake piston compressor tool adopts 360 degree ratcheting design, it is easy to push the piston into place from any direction, and hands will not fatigue due to continuous compression, saving time and effort. Ergonomic design for comfortable to operate.
This brake caliper tool is suitable for disc brake with twin and quad pistons fixed calipers or single and twin pistons floating calipers, not for drum brake. Used for pressing automotive disk brake caliper pistons back into bore when replacing brake pads. Two push plates that can apply force evenly.Easy to install, easy to remove, can compress your brake pistons effortlessly in seconds.
You can adjust the distance between the two steel plates by swinging the handle, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Pinch the center of the ratcheting mechanism until it gets enough pressure, then it will work great with just a couple swings of the ratcheting arm. i.e. you have to have some tension on the bolt/nut to allow the ratchet to activate. More labor-saving operation than c-clamp.
Coming with 2 caliper hanging hooks suspend the caliper, brake hoses, and other parts for easy inspection of other car components when brake repair. It would be good for at home garage brake jobs.When you receive the goods, if there are any problem, please contact us and do not directly open the dispute. We promise we will give you a satisfied solution after we confirmed it.
وصف
AutoWanderer Tool Universal brake caliper tool:
Professional brake caliper piston press tool, ideal for most vehicles and trucks on the road.
Ergonomic design for comfortable to operate.
Easy to install, easy to remove, can compress your brake pistons effortlessly in seconds.
A small tip for a case of unwork:
1. The ratchet works when there is a certain pressure on the expansion plates.
2. The handle can not be turned if the distant is too short between the plate and the handle. You could toggle the ratchet switch, turn the handle with a small angle repeatedly, then work it out )