This screen protector compatible with the touchscreen:
Gar min Rino 750, Rino 755t - 3 Inch

Package Includes:
3* 3" HD Clear touchscreen glass screen protector
3* Installation kit

Installation Steps:

1. PREPARE: Open the package, close the window, confirm the interior space dust-free. Check the right direction & positions the glass should to be.

2. CLEAN: Set the screen to clean mode, first clean the screen with a alcohol wipe, then the micofiber cloth, and lastly use the dust absorber remove all dust remainning.

3. HOLD/FIXED : If screen embedded into the bezel, use the sucker on the front side to help hold the glass. If screen protruding with the bezel, use the alignment sticker fixed the glass top side onto the frame.

4. PEEL: Gently peel off the glass's back released film/board and hold the border or by sucker, not touch the glue zone anywhere.

5. CHECK: Check again any dust may rest on the screen at different direction sight, use the absorber dab out every one.

6. ALIGN: Slowly align the glass to let it close to the screen from one side, make sure the glass was set the fully right position. Press lightly on the midline of the glass to let it absord to the screen automatically.

7. REMOVE: Remove the bubbles using the provided squeegee or credit card coated mico-cloth. For stubborn bubbles carefully lift up the glass (most close to the bubble) all the way to the bubble and re-apply. (finished the installation, you can take off the sucker~) Your screen no longer naked from now on!

If you have any questions or problems please feel free contact us, we'll get back to you soon.