EMAX Mini Magnum 2 flight control system makes building a high-performance FPV racer for racing or freestyle extremely easy. This tightly integrated system packs the FC, ESC, RX, VTX, PDB, current sensor and OSD together, which can be easily upgraded. It significantly reduces the time in soldering and figuring out what to do, thus, it can help you to get a flawless drone with nice clean build within a short time.

Grab a Mini Magnum 2 for your next micro and ultralight build. Built with a 20x20 form factor, the possibilities are nearly endless on what to install this stack on!
Features

F4 Flight Controller
5.8G VTX, 25mW / 200mW switchable. Also includes a 5.8G whip antenna and SMA adapter
Bullet 35A 4-in-1 ESC + current sensor, as well as freedom to choose DShot, Multishot, Oneshot125

Specifications:

F4 Flight Controller:

(OMNIBUSF4 Firmware)
STM32F405 MCU
MPU6000 accelerometer/gyro (connected via SPI)
On-board OSD
On-board Buzzer
Integrated 5V/3A BEC
Dedicated PPM/ Sbus receiver input
30x27mm board with 20mm mounting holes

35A BLHeli_32 ESC:
Continuous current 35A ( max burst 40A)
Supply voltage 2-6S Lipo( 1700kv Motor LIMIT for 6S )
STM32F051K6U6 MCU
BLHeli_32 firmware,support DSHOT,MULTISHOT,ONESHOT125
Top quality MOSFET
3oz high TG PCB board
32x37mm board with 20mm mounting holes.
Current Sensor

VTX:
Frequency band: 5658-5945MHz (FCC Compliant Channels / with HAM unlock)
SmartAudio support
Channel: 37
Transmit power: 13dBm/23dBm(25mW/200mW)
Supply voltage: 4.5V-5.5V
Antenna port: 50Ω

Stack:
Total weight: 17.21g
20x20mm Mounting Holes
32x37x17g Dimensions