Only for iPhone 12 and 12 Pro (6.1 inch), Not for 12 Pro Max / 12 Mini.

The screen replacement is without Ear Speaker, Front Camera, Proximity Sensor, so swap them out from your old screen and install them please.

Note: Testing it before installation
1. Do not apply pressure to the inner glass panel which is near with the front camera.
2. Make sure each screw is installed back to its original hole.
3. Be gentle and cautions to the flex cable connectors when installing.
4. Please check the screen and make sure all flex cables are in good condition and there is no debris on the connector.
5. DO NOT over-bend or use excessive force to tear it.
6. Please disconnect battery flex cable of your phone before you install our new screen, this is very important. Otherwise, it will be easy for your phone to short circuit.

Problem Solution
If your phone has some problems after installed. For example, cannot turn on, no touch, flashing, darker a corner, lines on screen etc., please follow these steps:
1. Reinstall all flex cables from the motherboard and double check all flex cables are in good condition, then reconnect your battery.

Package Include:
1 x Screen Assembly
1 x High Qulity Repair Tools Set
1 x Sim Card Pin
1 x 10D Full Coverage Hardness Tempered Glass
1 x Non-Dust Cloth
1 x Detailed Repair Flowchart
1 x Waterproof Adhesive

If you have any questions, please don't hesitate to contact seller, we will try our best to solve the problem in 24 hours. So long as the products cannot work without human factors, we will change new for you always.

Thanks for your buying, your choice will be the most correct, we are in the business area more than 13 years, trust us!