PC Products PC-11 PC-11 White Epoxy Paste. PC-11 was formulated as a true marine epoxy, allowing users to bond to wet, dry and fully submerged substrates. PC-11 formulation provides extended working time, for large and critical jobs, which allows the user to reposition work or make changes. High "wet grab" or tack of PC-11 makes overhead and sidewall work easy without drip or sag. PC-11 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. In cold or cool temperatures, place PC-11 containers near heat prior to using. PC-11 mixes and spreads easier at 80 degree F than at 40 degree F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-11. Denatured alcohol is excellent for smoothing applied PC-11. Also use Denatured alcohol to clean surfaces before applying. Use with: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, and much more. Work time (70 degree F): 30-40 minutes. Tack free cure time: 90 minutes. Cure for service: 8-12 hours. Maximum cure: 7 day. Gardner impact resistance: 140in./lb. Conduction (electric): non conductive. Excellent thermal shock. Non toxic once cured. Heat range: -20 to 200 degree F.