Specification:
Model: HFS-25
Voltage: 6-380V
Control mode: Paddle
Switch type: SPDT
Material: 304 stainless steel body, copper connector, phosphor bronze bellows
Connector: 1" / 25mm
Max.working pressure: 1.0MPa
Ambient temperature: 0~60℃
Liquid temperature: -10~100℃(Fluid without icing)
Contact life: 1000000 times
Microswitch Voltage: 220VAC
Microswitch Current: 15A
Weight: Approx.416g/ 14.7oz

Package List:
1 * Water Flow Switch
5 * Paddle
1 * User manual

Installation method:
1. Open the flow switch
2. The switch has been set at minimum flow rate. Turn the adjusting screw counterclockwise to increase the flow setting value.
3. Press the target to check whether the micro switch can work normally. Excessive clockwise rotation of the adjusting screw may to the failure of the flow switch.
4. After the installation, please press the lever of the flow switch several times to check. If there is no "click" sound, turn the adjusting screw counterclockwise until there is "click" sound.
5. The adjustment screw of lacquer seal is only used for the first time to adjust the state of flow switch. Please do not change or adjust it.
6. Observe three operating cycles to ensure that the switch and the system to which it is connected are operating properly and cover the switch enclosure promptly.