Specific parameters
Category: Patches
Color: black, gray, white, khaki, camel
Material: Polyester
Product size: 12.5×9.5×0.05cm/4.9×3.74×0.019in
Packaging: Bag
Packing list: 4pcs × black, 4pcs × gray, 4pcs × white, 4pcs × khaki, 4pcs × camel
Function
1. Place the patch in the desired position, with the side with hot melt adhesive attached to the clothes (do not remove the glue), preheat the iron, and iron the patch from the front for about 15 seconds. You can also use a needle and thread before ironing. Fix the patch position to prevent the patch from shifting. Then turn over the fixed patch and the clothes, iron from the reverse side for 30-60 seconds to ensure that the adhesive is melted, and then iron from the front for 1-2 minutes. Iron the corners twice more to ensure a smooth surface
2. In order to prevent burns, you can put a layer of thin cotton cloth on the cloth sticker (not a fading cloth). After ironing, check the edges to see if they are ironed properly.
3. Determine the temperature according to the thickness of the decal. Thicker cloth requires higher temperature and longer time
4. Note: For cloth patches with sequins or relatively bright surfaces (since sequins are all plastic products), be sure to put a layer of cloth on them and iron them at low temperature (below 150°C), or use a steam iron directly. To prevent the plastic sheet from melting due to excessive temperature
5. The best way is to use a needle and thread to sew a few stitches on the edge of the patch after ironing it. This will make it stronger and more comfortable
6. If you don't have an iron at home, you can also directly sew the patch on the clothes with threads of the same color