Specification:
ItemType: Electric Bike Controller Set
Gross Weight: 695g / 24.5oz
Controller Parameters:
Controller Material: Aluminum alloy
Current: 15A
Voltage: DC 36V 48V
Speed Setting: 1-4.2V dual mode
Brake Input: Low level
Panel Parameters:
Panel Material: ABS, acrylic
Applicable Handlebar Mount: 22.2mm / 0.9in diameter handlebar
Voltage: 24V 36V 48V
Waterproof Grade: IP65
Interface: 5pin
Communication Protocol: No. 2 communication protocol
Display Function: Speed display, power assisted gear display, power indicator, fault prompt, total mileage, single mileage, single driving time display

How to Use:
Device connection:1. Instrument connection: The instrument terminal is connected to the 5pin terminal of the controller2. Power assist magnetic point connection: The power assist sensor cable interface is connected to the controller with a 3pin connection port with yellow, gray and black lines.3. Dial connection: The dial interface is connected to the controller with a 3pin connection port with red, black and white lines.

packing list:
1 x Controller
1 x Meter
1 x Dial
1 x Power Assist Sensor Wiring
1 x Power Assist Sensor Boosting Sheet
1 x Power Assist Sensor Ring
2 x Fixed Belt
1 x Controller Storage Bag

1 x Meter Manual

Note:
1. It needs to be used with products that are consistent with the communication protocol.
2. For JN controller can match all instruments of No. 2 communication protocol.