Instruction for use:
1. Clean the base surface, make sure the surface clean and dry,no oil stains before application.
2. Align the width of the desired base gap and cut the butyl seal tape into the size needed.
3. Peel off the released film on the back of the tape.
4. Repeatedly press the butyl sealant until the tape is fully stuck with surface, apply the tape and don`t move it within 24 hours.Ensure that there is no rain within 24 hours before and after applying the adhesive tape.

Package Included:
1 x Adhesive Butyl Tape: Length: 5m (16 ft) x Width: 5cm (2 inch) x Thickness: 00mm(1.58 Milli-inch)

Note:This tape is not suitable for hoses that are easily deformed under stress. Instead, the leakage of hard pipes such as stainless steel pipes or iron pipes can be repaired with this butyl rubber belt.