مميزات خاصة

Due to the high precision and stable frequency of the DDS, it is also very suitable for the oscilloscope's scan time calibration factor.
The square wave output is also suitable for oscilloscope attenuators and probe pulse adjustment.
The main output waveforms are sine wave and square wave, triangular wave, and sawtooth wave.
Have a filter (can be turned on/off ) to suit the output of sine wave and pulse wave.
Made of high-quality material, durable and practical to use.

وصف

Specification:
Frequency Range: Sine wave 1Hz~500kHz (Magnitude is flat up to 200kHz, above 200kHz, the magnitude may drop as frequency increases), other waveforms 1Hz-20kHz with good phase noise and small distortion, if you don't care the phase noise and distortion, it can output full frequency range.
Resolution: 1Hz
Output Waveforms: Sine wave, square wave, triangular wave, forward sawtooth wave, reverse sawtooth wave.
Sinewave Distortion: 1% (frequency =1kHz)
Output Amplitude: Maximum ±10V(P-P).
Output Impedance: 50 ohm
DC Offset: Maximum ±10V, can be disabled
Internal Filter: For sinewave or pulse, can be turn on/off
Power Supply: DC3.5-10V. DC 5V adaptor or 3.7V Lithium battery is recommended.
Weight: Approx.172g/6.1oz

Package:
1 x Function Generator
1 x USB Cable
1 x Instruction Manual

مرحبًا،

بحث

FG-100 1 هرتز-500 كيلو هرتز DDS وظيفة إشارة مولد عداد التردد إشارة مصدر وحدة شرط مربع مثلث سن المنشار الموجي

مميزات خاصة

وصف

منتجات شبيهه