Item Content:
1 Pcs Fuel Injector
Part Number:
0280158821,0 280 158 821,0280158843,0 280 158 843
Product Description:
Product Condition: New & High-Quality
Fitment Type: Direct Replacement
Fitments:
For LS3 LS7 Corvette C6 Z06 Camaro G8
For Honda Audi VW Mazda Dodge Toyota Supra turbo 2JZ-GTE Ford GM
Our Advantages:
Specialized in auto aftermarket parts for more than 10 years,professional technical team,providing nice quality products and nice After-sales service.
Installation Step of High Pressure Pump:
1. Detect high pressure pump O-ring and use clean engine oil slightly wetting insert roller tappet into vacuum pump.
2. Rotate the crankshaft until the roller tappet is at its lowest point Insert the high pressure pump into the vacuum pump.
3. Cross tighten the fastening bolt by hand,and cross tighten the fastening bolt with the specified torque of 20N.M.
4. Use engine oil to infiltrate the ball head of the high pressure hose and install it Tighten the lock nut of the fuel distributor indicated by the arrow in the drawing with a wrench.
5. Fasten the high pressure pipe connector with a wrench and tighten the live joint nut of the high pressure tube with another wrench.
6. Install high pressure pipe clamps and use 5N.m torque to tighten clamps. Start the engine after installation to observe whether there is oil leakage on each interface.
Note:
If fittings and connections positioned wrong,please check fuel pump follower whether for wear. If yes,maybe it'll affected high pressure oil pump normal operation and connection. Please replace camshaft follower.