Method of Operation:
1.Tear off the plastic film from the overgrip
2.Tear the double-sided tape at the end of the grip
3.Begin winding from the bottom of the racket, fixed and compacted
4.After the hypotenuse is completed, begin winding. Due to the different diameters of the bottom bracket and the wooden handle, the first two round please use more strength to wrap it tightly
5.After three rounds of winding, you will enter the stage of the wrapped wooden handle. At this stage, use less strength to wrap
6.When wrapping around the front handle of the handle, please use more strength to wrap it tightly
7.Cut off the extra part
8.Cut into a hypotenuse as the picture
9.Tear off the sealing glueWrap the sealing glue around the seal part
10.Wrap the sealing glue around the seal part