Description
This 16 port midspan injector will add Power over Ethernet to your existing network switch. Using a midspan is a cost effective way to add to your existing infrastructure. Ideal for VOIP systems, cameras and other PoE enabled devices, it is designed to pass power on Mode A (pins 1,2 3,6) while using all 4 pairs to send 10/100/1000 gigbit data. The passive feature allows all devices to receive the same voltage (48v) - the total budget for all devices combined is 240 watts. Check device specifications for power needs.
Product Features
Instantly add 802.3af PoE to any network switch
10/100/1000 gigabit data rate capability
Power up to 16 devices with 240 watts total power
Two 48v 120w UL/CE/FCC approved power supplies included: 110 to 220 VAC operation; 90% efficiency
Use to power IEEE 802.3af devices or devices labeled "12v,PoE"
Shielded RJ45 ports: 16 data in (LAN), 16 Data + Power (PoE) out
Extends power up to 328 ft or 100 meters
Passive "always on power" delivers 48v from all ports
Applications
IP phones
WiFi Access points
IP Cameras
Devices labeled "12 volt, POE" - please see our video on this topic
Other IEEE 802.3af devices
To power our 802.3af 5v and 12v splitters for non-poe devices
Other products from PoE Texas
AT-16 - Active Gigabit 802.3at 16 port injector
GPOE-4A-48v48w - 4 Port Mode A injector with power supply
GPOES-8-7AB-48v60w - Unmanaged 8-port switch with 7 PoE and 1 uplink
POE-8-48v60w - 8 Port injector with 10/100 data
GPOE-16A-48v120w - 16 Port injector with 120 watts available
POE-12-48v120w - 12 Port injector with 10/100 data
PoE-Tester-GEN2 - Handheld voltmeter to detect and display PoE power